Yamaha RXA3010 FIRMWARE free download

File name RXA3010_FIRMWARE.pdf

RX-A3010/RX-V3071 UPDATING FIRMWARE / When the following parts are replaced, the firmware must RX-A3010/RX-V3071 be updated to the latest version. DIGITAL1 P.C.B. DIGITAL2 P.C.B. FPGA Flash ROM: IC82 on DIGITAL1 P.C.B. NETWORK Flash ROM: IC904 on DIGITAL1 P.C.B. DSP1 (TI) Flash ROM: IC923 on DIGITAL1 P.C.B. DSP2 (TI) Flash ROM: IC518 on DIGITAL2 P.C.B. Confirmation of firmware version and checksum Before and after updating the firmware, check the firmware version and checksum by using the self- diagnostic function menu. Start up the self-diagnostic function and select "S4. ROM VERSION/CHECKSUM" menu. Using the sub-menu, have the firmware version and checksum displayed, and note them down. (See "SELF-DIAGNOSTIC FUNCTION") * When the firmware version is different from written one after updating, perform the updating procedure again from the beginning. Initializing the back-up IC (EEPROM: IC83 on DIGITAL1 P.C.B.) After updating the firmware, the back-up IC MUST be initialized by the following procedure to store the setting information (soundfield parameters, system memory and tuner presetting, etc.) properly. Start up the self-diagnostic function and select "S3. FACTORY PRESET" menu. (See "SELF-DIAGNOSTIC FUNCTION") Select "PRESET RSRV", press the "MAIN ZONE " key to turn off the power once and turn on the power again. Then the back-up IC is initialized. Required Tools